Who knows shift cable end fitting Part Number for Suzuki DF250??

[inletsurf]

I am rigging a DF250 Suzuki 4-stroke, don't have the plastic shift and throttle cable end fitting that pin onto the motor side throttle and shift linkage. Suzuki manual does not have this part listed. My new cables are Uflex, MachZero's with the 10-32 threaded ends. Need the two end fittings. Checked teleflex and uflex websites and they do not have adapters specified for suzukis. Anyone have any recommendations?
Thanks in advance.

[250 Osprey]

Suzuki, Yamaha, and Honda basically use the same part. It's the same on both the helm end and the motor end. Google under Outboard Cable Ends. Should find something. If not, let me know, I can get you a couple.

[inletsurf]

250 Osprey - 12/6/2008 4:27 PM

Suzuki, Yamaha, and Honda basically use the same part. It's the same on both the helm end and the motor end. Google under Outboard Cable Ends. Should find something. If not, let me know, I can get you a couple.

Thanks for the reply. The suzuki control box came with cable ends for its side, however, I checked them against the pin on the throttle and shift lever, and the hole was quite a bit oversized. Do you have a part number and manufacturer for these? thanks. Steve

[obspec]

the suzuki part # is 67467-89j01, they list for 4.49 each,

[inletsurf]

Thank you!