Yamaha fuel management question?

FastBob · 08-11-2002, 05:34 PM

Is the Yamaha fuel management system available for the 150 HP carbed motors or is it only for the fuel injected motors?
Thanks,
FastBob

capt benj · 08-11-2002, 06:29 PM

The sensor/gage measures gas flow and can be used on any motor.

FastBob · 08-11-2002, 07:42 PM

Thanks for the reply capt benj
FastBob

mpwitte · 08-12-2002, 06:49 PM

If you decide to use this system, make sure you mount the flow sensor after your filter/seperator. The sensor has a fine screen in it to protect from crud and if you put it before the filter it WILL clog at some point. Mike.

FastBob · 08-12-2002, 08:39 PM

Thanks Mike

KevinM · 08-13-2002, 11:34 AM

As nice a unit as it is the Yamaha fuel management is pretty pricey. Why not take a look at the Standard FF41 or the Navman.

Irish Reel · 08-23-2002, 12:44 AM

Get the Yammi one - it's only money. It's gotta match too.