Eastern Marine - converging brake kit

THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.




View Full Version : converging brake kit


billfishr
08-05-2012, 01:54 PM
Good morning,
I have a loadrite trailer [2002] single axle,3700lbs capacity.I am sorry that I can no longer read the model number on the sticker thats on the trailer.
Trailer has torsion axle with tiedown dics brakes.Would like to convert brakes over to kodiak SS.
Also I need a left side [or drivers side,as in connected to truck] axle spindle.
Could you please send me a price including shipping to 20657
Thank you for your time.
Sincerely,Jeff Hall


EASTERNMARINE
08-06-2012, 06:57 AM
Jeff,


Do you want to go with the all stainless Kodiak kits? Also are you going to replace the actuator and brake lines also? Does your spindle bolt to the torsion arm?


Regards,
Chris

billfishr
08-06-2012, 10:12 AM
Chris,
Yes all SS.Actuator and brake lines I think are good.And yes spindle bolts to axle.
Thanks, Jeff


EASTERNMARINE
08-07-2012, 08:27 AM
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/1/4188_th.jpg (http://www.easternmarine.com/kodiak-10-trailer-disc-brake-assy-all-ss-1hrcm10sskit)KODIAK 10" Trailer Disc Brake Assy, ALL S.S. #1HRCM10SSKIT (http://www.easternmarine.com/kodiak-10-trailer-disc-brake-assy-all-ss-1hrcm10sskit) - Stock #: 1561003

$379.00 $758.00
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/3/9/3951_th.jpg (http://www.easternmarine.com/20-single-axle-disc-drum-flexible-brake-tubing-kit-80326)20' Single Axle Disc/Drum Flexible Brake Tubing Kit #80326 (http://www.easternmarine.com/20-single-axle-disc-drum-flexible-brake-tubing-kit-80326) - Stock #: 5256044

$54.50 $54.50
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/5/2/5256065_small.jpg (http://www.easternmarine.com/tie-down-engineering-model-66-disc-brake-actuator)TIE DOWN ENGINEERING Model 66 Disc Brake Actuator #70460 (http://www.easternmarine.com/tie-down-engineering-model-66-disc-brake-actuator) - Stock #: 5256065

$99.00 $99.00
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4709_th.jpg (http://www.easternmarine.com/torsion-axle-spindle-for-1-3-8-x-1-1-16-wheel-bearings-80043)Torsion Axle Spindle for 1-3/8" x 1-1/16" Wheel Bearings #80043 (http://www.easternmarine.com/torsion-axle-spindle-for-1-3-8-x-1-1-16-wheel-bearings-80043) - Stock #: 5257029

$39.95 $39.95
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4712_th.jpg (http://www.easternmarine.com/castle-nut-for-mounting-torsion-spindle-10665z)Castle Nut for mounting Torsion Spindle #10665Z (http://www.easternmarine.com/castle-nut-for-mounting-torsion-spindle-10665z) - Stock #: 5257032

$1.99 $1.99
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4711_th.jpg (http://www.easternmarine.com/conical-spring-washer-to-mount-torsion-spindle-10528z)Conical Spring Washer to mount Torsion Spindle #10528Z (http://www.easternmarine.com/conical-spring-washer-to-mount-torsion-spindle-10528z) - Stock #: 5257031

$1.35 $1.35
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4713_th.jpg (http://www.easternmarine.com/ss-cotter-pin-for-mounting-torsion-spindle-1060ss)S.S. Cotter Pin for mounting Torsion Spindle #1060SS (http://www.easternmarine.com/ss-cotter-pin-for-mounting-torsion-spindle-1060ss) - Stock #: 5257033

$1.19 $1.19
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/3/1/3191_th.jpg (http://www.easternmarine.com/1-14-nut-washer-cotter-pin-set-81169)1" -14 Nut, Washer, Cotter Pin Set #81169 (http://www.easternmarine.com/1-14-nut-washer-cotter-pin-set-81169) - Stock #: 5256084

$4.59 $4.59

Grand Total $996.20 Subtotal $960.57 Shipping & Handling (United Parcel Service - UPS Ground) $35.63




Regards,
Chris
1.800.453.7379

billfishr
08-08-2012, 01:41 PM
Chris.
Thank you for your timely response.
In all honesty,I did not expect the price to be this high.Do you have any suggestions on a brake system that I can install that will work on a consistent basis with out having to un-freeze the stuck pistons in the wheel calipers between each launching?
I currently have hubs and rotor as a one piece unit that are cast iron.They rust up in minutes.Calipers are also cast iron.Pistons freeze between each use.Brake pads get chewed up in an hour.I ended up having to drilled a hole in the tongue years ago and put a bolt in it to eliminate the brake system.
However,with loosing a bearing[dust cap fell off] and tearing up the spindle.I thought it might be time to revamp the whole system. So any suggestions would be appreciated
Thanks again,Jeff.

EASTERNMARINE
08-09-2012, 05:45 AM
I would recommend the dacromet/stainless brakes from Kodiak. You get a one piece dacromet hub and rotor, and a stainless caliper assembly. I will provide you another quote with the dacromet/stainless brakes.

Chris

EASTERNMARINE
08-09-2012, 05:49 AM
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/3/9/3951_th.jpg (http://www.easternmarine.com/20-single-axle-disc-drum-flexible-brake-tubing-kit-80326)20' Single Axle Disc/Drum Flexible Brake Tubing Kit #80326 (http://www.easternmarine.com/20-single-axle-disc-drum-flexible-brake-tubing-kit-80326) - Stock #: 5256044

$54.50$54.50
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/5/2/5256065_small.jpg (http://www.easternmarine.com/tie-down-engineering-model-66-disc-brake-actuator)TIE DOWN ENGINEERING Model 66 Disc Brake Actuator #70460 (http://www.easternmarine.com/tie-down-engineering-model-66-disc-brake-actuator) - Stock #: 5256065

$99.00$99.00
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4709_th.jpg (http://www.easternmarine.com/torsion-axle-spindle-for-1-3-8-x-1-1-16-wheel-bearings-80043)Torsion Axle Spindle for 1-3/8" x 1-1/16" Wheel Bearings #80043 (http://www.easternmarine.com/torsion-axle-spindle-for-1-3-8-x-1-1-16-wheel-bearings-80043) - Stock #: 5257029

$39.95$39.95
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4712_th.jpg (http://www.easternmarine.com/castle-nut-for-mounting-torsion-spindle-10665z)Castle Nut for mounting Torsion Spindle #10665Z (http://www.easternmarine.com/castle-nut-for-mounting-torsion-spindle-10665z) - Stock #: 5257032

$1.99$1.99
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4711_th.jpg (http://www.easternmarine.com/conical-spring-washer-to-mount-torsion-spindle-10528z)Conical Spring Washer to mount Torsion Spindle #10528Z (http://www.easternmarine.com/conical-spring-washer-to-mount-torsion-spindle-10528z) - Stock #: 5257031

$1.35$1.35
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/4/7/4713_th.jpg (http://www.easternmarine.com/ss-cotter-pin-for-mounting-torsion-spindle-1060ss)S.S. Cotter Pin for mounting Torsion Spindle #1060SS (http://www.easternmarine.com/ss-cotter-pin-for-mounting-torsion-spindle-1060ss) - Stock #: 5257033

$1.19$1.19
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/3/1/3191_th.jpg (http://www.easternmarine.com/1-14-nut-washer-cotter-pin-set-81169)1" -14 Nut, Washer, Cotter Pin Set #81169 (http://www.easternmarine.com/1-14-nut-washer-cotter-pin-set-81169) - Stock #: 5256084

$4.59$4.59
http://www.easternmarine.com/media/catalog/product/cache/1/thumbnail/75x/9df78eab33525d08d6e5fb8d27136e95/7/1/7142_th.jpg (http://www.easternmarine.com/kodiak-10-trailer-disc-brake-assy-dacromet-stainless-1hrcm1)KODIAK 10" Disc Brake Assy, Dacromet & Stainless #1HRCM10DACSS (http://www.easternmarine.com/kodiak-10-trailer-disc-brake-assy-dacromet-stainless-1hrcm1) - Stock #: 1561029

$169.95$339.90

Subtotal $542.47
Shipping & Handling (United Parcel Service - UPS Ground) $35.63
Grand Total$578.10

EASTERNMARINE
08-09-2012, 05:54 AM
Another option for you would be the Tie Down G5 Stainless brake with aluminum calipers.

http://www.easternmarine.com/media/catalog/product/cache/1/small_image/9df78eab33525d08d6e5fb8d27136e95/7/1/7152_th.jpg (http://www.easternmarine.com/tie-down-g5-disc-brake-82091) TIE DOWN 9.6" S.S. "G5" Disc Brake Assembly, 5-Lug #82091 (http://www.easternmarine.com/tie-down-g5-disc-brake-82091)

Stock# 5256227
NEW DESIGN! The "G5" S.S. Disc Brake kit from Tie Down Engineering replaces 10" Drum Brakes and mounts to the existing 4-hole axle brake flange. Includes single piston aluminum caliper, patented bi-metal aluminum/ stainless piston, oil impregnated bronze bushings, ceramic pads with stainless steel backing plates, stainless steel slider pins, galvanized mounting bracket and complete installation instructions.

$139.99


Let me know if you have any questions.


Chris

billfishr
08-09-2012, 01:00 PM
Chris,
My trailer has the tiedown model 70E actuator now.Would that be capable with the dacromet system? And out of curiosity would the new tiedown system that you posted work for a disc brake replacement.It reads for drum brake replacement.Also,what are your thoughts on aluminum rotors?
And I also apologies to you for being such a PIA.
Sincerely, Jeff

billfishr
08-11-2012, 04:27 AM
Chris,
Will call Saturday morning with an order.
Thank you, Jeff

billfishr
08-11-2012, 05:26 AM
Chris,
Thank you for your time.I placed an order with Phil.
Sincerely, Jeff

EASTERNMARINE
08-11-2012, 07:26 AM
I was off yesterday and didn't get your message. Thanks for placing your order with us and have a great day!


Chris

EASTERNMARINE
12-27-2012, 05:19 AM
Are you looking for a price for the dacromet kodiaks?



:tht_rulez:



Search Engine Friendly URLs by vBSEO 3.2.0