Shipyard Isl. Marine Engine Parts - Trim tilt issue
THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.
On one of my engines the tirim/tilt will not go down.It will go up with no issues. While pressing any switch all i am getting is a clicking at the relay.
does this sound like my relay is no good? 2002 F225 do you know what is the relay part # ? ,thanks
Sounds like a bad relay.
New part http://www.simyamaha.com/Yamaha_Relay_Assembly_p/69j-81950-02-00.htm
One that was new, sold and returned. http://www.simyamaha.com/Yamaha_Relay_Assembly_p/69j-81950-02-00used.htm
Thanks
Andy
Salty Kings
05-30-2012, 08:00 PM
If you find out it is a switch I have the tilt and trim you should need. I bought it and ended up getting a whole new controller. I took mine apart and it is pretty easy to change up
Good luck
Ben
I believe all switches are good. Is it a difficult job to replace the relay?How much stuff do i need to remove to get at it and change?
Got the new relay and installed it. Only took a little over an hour. All is good.
Got the new relay and installed it. Only took a little over an hour. All is good.
Glad to hear it. :thumbsup: