Marine Electronics Forum - icom radio parts

I need two power plugs for the Icom VHF,model IC M302
any help?

Huh?? The M302 has 2 wires coming out the back for power, a red (+) and black (-) 12v wire. Just connect them to properly breakered or fused power supply/bus bar... ??

Page 32 of manual:

Thanks . my radios appear to use a plastic plug and have three wires, ??

I need two power plugs for the Icom VHF,model IC M302
any help?

My Standard Horizon has a plug as well which appears it would be somewhat hard to find, maybe a Deutsch or Delphi but I haven't seen many that look similar.

I would call ICom who will certainly tell you the part, then you can order some and make careful crimps with needle nose pliers instead of shelling out $400 for the tool.

OR, you could replace them with an easy-to-find local replacement, even bullet quick connects would do :)

Are you the first owner of the radio? Is it possible the last owner added the connector?

Cut the plug off. If dont have the other end is serves no purpose.

While we are on the subject of Icom VHF parts anybody know where you can buy a UX-120 dsc module for a M59? Thanks.