Jensen Marine Electronics - Jensen msr3007
THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.
exceed
04-07-2012, 03:52 PM
I have a Xm radio that I have been using with this radio with the fm tuner. I would like to direct connect it to my radio to keep any static and interference out of it. My question is how? The Xm radio is in my T-top electronics box and my radio is mounted in the side of my console.
JENSENTechService
04-09-2012, 10:44 AM
In order to listen to your XM Radio tuner, you would need to use either one of the following methods: the built-in FM modulator as you currently are or connect the Audio Out from the XM Radio tuner to the AUX IN on the MSR3007 and select AUX IN by the MODE button. The AUX IN jack is located on the front of the stereo in the lower right hand corner. This method will provide the best audio quality and will not have reception issues like you may experience the FM modulator.
Please feel free to contact us with any additional questions or concerns. You can reach us on our toll free technical support line at (877) 845-8750. We are available M-F 8:00 AM till 6:00 PM EDT.
We look forward to hearing from you.
exceed
04-09-2012, 12:02 PM
That was the answer I needed. I was crawling under the console looking at the back of the unit when what I needed was on the front. :rofl: Thanks for your help! :thumbsup: