Marine Electronics Forum - Simrad Structure Scan Ducer

THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.

View Full Version : Simrad Structure Scan Ducer

03-26-2012, 06:37 PM
Can someone help clarify something for me? I am looking at the NSS with the B164 Ducer. If I add Structure Scan, does it require a completely seperate Ducer?

03-26-2012, 06:42 PM
Yes I just bought 2 nse 12 units u will need either 1 or 2 structure scan transducers if u have a flat spoton the hull u can use 1 otherwise u will need 2. They come as a package around 950 for the pair and y cable there is a rebate on them now

03-26-2012, 07:36 PM
Thanks for the response! Is there much to adjust on the scan or is it really "plug and play" as long as it is on an auto setting. A buddy recently purchased one and was having difficulty reading the scan. He was also in 15 feet so some adjustment might have been needed.

Jay D
03-26-2012, 09:15 PM
i just started playing with mine,seams pretty easy to me.very east to determine what the bottom looked like,no problem in figuring out what we were seeing.only a few adjustments to play with.only problem i had was having to trim up my 225 to get it out of the ducers line of site.

Search Engine Friendly URLs by vBSEO 3.2.0