Marine Electronics Forum - Shoot-thru transducer on a late model Sea Hunt?

THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.




Byter
03-21-2012, 07:45 PM
Anyone have a shoot-thru on a later model Sea Hunt? If so, where is it placed (which side, how far from the transom, etc.)? I appreciate any info and especially photos!


bradv
03-22-2012, 04:17 AM
anywhere near the back is fine as long as you have room for the tub for the ducer to sit in.

semperfifishing
03-22-2012, 09:59 AM
Anyone have a shoot-thru on a later model Sea Hunt? If so, where is it placed (which side, how far from the transom, etc.)? I appreciate any info and especially photos!

Which model of shoot thru are you considering?


Byter
03-22-2012, 12:30 PM
M260 for Lowrance. I have the room. Just wanting to know if there was a dedicated space or any other gotcha's. Here's a picture of the bilge near the transom (at top of image) with a 6" x 9" piece of cardboard.

229304

semperfifishing
03-22-2012, 12:39 PM
That is one clean bilge...!

Yes you have plenty of room and just make sure it is not over the "Keel" area..as they is normally reinforcing there.
Also, make sure an get down to base fiberglass by removing all paint etc.



Search Engine Friendly URLs by vBSEO 3.2.0