Boat Lift Distributors, Inc. - Wood bunk replacement

THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.

PDA

View Full Version : Wood bunk replacement

pursuit2800

07-20-2011, 01:21 PM

Michael,

Thanks for the great support you provide the forum members.

I would like to replace the wood bunks on my elevator lift and have a couple of questions. What do you recommend as the spec for the wood? Is this just marine lumber or is there a more exact spec I should be requesting. Also, where would you suggest I could purchase this spec of lumber? Is it generally available or special order at lumber yards. I'm in the Ft. Lauderdale area. Thanks again- Dave

boatlift

07-21-2011, 06:47 AM

Dave,

Is your boat a step hull vessel? If it is unfortunately you will need to buy step hull bunks to match your hull. If it isn't, simply run to any lumber yard & pick up 3" x 12' marine treated lumber. You can cover the bunks with carpet but in my opinion this is a waste of time. Sure on a boat trailer you need the carpet b/c you come sliding onto the trailer, there is a tremendous amount of friction. With a boat lift you do not come sliding on, there is no friction since you're pulling up over the bunks & then raising the craft out of the water. How much does your boat weigh? Call me if you would like to discuss further.

Tight Lines & Happy Hunting,
Michael Fulweber
Boat Lift Distributors & Big Country Outdoors
800-657-9998
713-461-9443 (local)
www.liftboat.com (http://www.liftboat.com)
www.bigcountryoutdoors.net (http://www.bigcountryoutdoors.net)
Logic, safety & superior construction is the pulse of Boat Lift Distributors.