Marine Electronics Forum - Charging AGM's with ACR

THE HULL TRUTH is the world's largest FREE network for the discussion of Boating & Fishing. Whether you're researching a new boat, or are a seasoned Captain, you'll find The Hull Truth Boating & Fishing Message Forum contains a wealth of information from Boaters and Sportfishermen around the world.




View Full Version : Charging AGM's with ACR


kenichi
10-15-2009, 01:23 PM
Hello all,
I have two AGM group 27's, one being a house battery and the other is my starting battery. Also have an Blue Sea's ACR combiner mounted. Now when it come time to charge these batteries on AC battery charger what is proper placement of the charging clips/clamps on respective batteries?
Thanks all in Advance,
Kenichi


Glen E
10-15-2009, 01:39 PM
put the leads on one batt..if the acr is working...

kenichi
10-15-2009, 01:54 PM
Alrighty Glen E thanks a bunch, I'll hook up leads on one battery and get em charged. I have been told once the main battery-starting is up to snuff the ACR allows current to the house battery for topping off?
Kenichi


Glen E
10-15-2009, 02:07 PM
It sounds like you're not sure what an ACR does - read away:

http://www.veradoclub.com/smf/index.php?topic=2209.msg16245#new

kenichi
10-15-2009, 06:01 PM
It sounds like you're not sure what an ACR does - read away:

http://www.veradoclub.com/smf/index.php?topic=2209.msg16245#new

Thanks again sir! Just the info I needed. :thumbsup:

kchace
10-16-2009, 05:54 AM
I have this set up and do it all the time. Once the charge voltage across the first battery reaches the ACR cut-in voltage, the ACR will close (after about a 1 minute delay) and both batteries will be charged.

Ken

kenichi
10-16-2009, 11:06 AM
Thanks Kchace!



Search Engine Friendly URLs by vBSEO 3.2.0